PC Cooling Fan 120mm 2800 RPM LP4 removeBIOSTAR TB360-BTC PRO Crypto Mining Motherboard 2.0 removeMining Rig Frame removeCustom Build GPU Mining Rig removeServer PSU Breakout Board 12 Ports removePCIE Riser Card for GPU Mining Rig 010S PLUS removeBiostar AMD Radeon RX 580 8GB XT Mining Graphics Card removeVEDDHA Mining Rig Fans remove
NamePC Cooling Fan 120mm 2800 RPM LP4 removeBIOSTAR TB360-BTC PRO Crypto Mining Motherboard 2.0 removeMining Rig Frame removeCustom Build GPU Mining Rig removeServer PSU Breakout Board 12 Ports removePCIE Riser Card for GPU Mining Rig 010S PLUS removeBiostar AMD Radeon RX 580 8GB XT Mining Graphics Card removeVEDDHA Mining Rig Fans remove
Imagegpu mining pc fanbiostar tb360 btc pro 2.0gpu mining rig frameMining RIg12 ports breakout boardpcie riser card for gpu mining rig 010sbiostar amd radeon rx580 mining gpuveddha mining rig fans vd12sh
SKUCLD12025SHD36-7CD-BEB-1VER010SVA5815RV82VD12SH
Rating
Price£7.95£140.00£1,000.00£24.95£44.95£585.00£795.00£6.95£7.95£449.00 Original price was: £9.95.Current price is: £7.00.
Stock

Out of stock

Out of stock

In stock

Available on back-order

Out of stock

Out of stock

AvailabilityOut of stockOut of stockIn stockAvailable on back-orderOut of stockOut of stock
Add to cart

Read more

Select options This product has multiple variants. The options may be chosen on the product page

Select options This product has multiple variants. The options may be chosen on the product page

Select options This product has multiple variants. The options may be chosen on the product page

Add to basket

Add to basket

Read more

Read more

Description

  • Bearings: Quiet sleeve bearing design

  • Voltage : 12V DC
  • Current: 0.31A

  • Speed: 2800 RPM

  • Air Volume: 102CFM

  • Noise: 47.4db (A)

  • Power: +/- 15% of nominal power

  • Life Expectancy: 600000 hours

  • Interface: LP4 female D-type 4-Pin serial (2 pins in use)

  • Supports 9th & 8th Generation Intel Core™ Processor
  • Intel B360 single chip architecture
  • Support 2-DIMM DDR4-1866/2133/2400/2666 up to 32G maximum capacity
  • Support 12 x PCIe 3.0 slots
  • Support M.2 (6Gb/s) Connector
  • Support HDMI Connector
  • Open air mining rig frame with no limit to GPU length or width
  • Comes with all of the necessary screws and power on switch
  • Our rig case is made from high quality stainless steel material
  • The frame case is easy to assemble. All of the holes are pre-drilled
  • Case frame only - Cooling Fans, Cables can be purchased separately
Current processing time: 7-9 working days. We will build the rig for you. Just select the options below:
  • 12 Port Server Power Supply Breakout Board for Dell, HP
  • Turn the HP server IAI 64 Pin to 12pcs 6 Pins.
  • The adapter card uses LED to display the power supply operating voltage in real time.
  • The riser card adopts a multi-layer PCB process to ensure that the PCB will not be hot when the PCB is under high current.
  • Power push button

PCIE Express x1 to x16 Riser Card

  • 12v Powered
  • 8 High Quality Capacitors
  • Designed to fit most mining cases
  • 60cm USB 3.0 cables
  • Mining vBIOS (not for gaming)
  • 3 months warranty from manufacturer
  • 8GB 256bit GDDR6 8Gbps
  • Bulk packaging (no retail box)
  • Discount for 20pcs - send us a message
  • 29mh/s on Ethash
Ordered on request in boxes of 20pcs each. Contact us for bulk pricing.
  • Bearings: High Precision Double
  • Voltage Ball Bearings : 12V
  • Current: 0.3A
  • Speed: 2500 RPM
  • Air Volume: 76.5CFM
  • Noise: 19db (A)
  • Power: +/- 15% of nominal power
  • Life Expectancy: 600000 hours
  • Interface: D-type 4-Pin serial
Content

































































Aesthetic
COLORBlack
MATERIALFrame: Plastic UL94V-0
SECONDARY MATERIALImpeller: Plastic UL94V-0
Specifications
COOLING DEVICECooling Fan
RPM (RATED MAXIMUM)2800 -rpm
Motor Protection:
Impedance Protected
Operation Temperature: -10℃~ 70℃
Package
PACKAGE TYPEPlain
PACKAGE CONTENTS1*Cooling Fan
Dimensions | metric
DEPTH25 mm
HEIGHT120 mm
WIDTH120 mm
PRODUCT WEIGHT180 g











































ModelVoltageCurrentPowerSpeedAir FlowAir PressureNoise
Part No.VDCAmpWattRPMCFMmmH2OdB-A
CLD12025HH1212V0.313.7228001024.4547.4

Model

Biostar TB360-BTC PRO 2.0

Version 6.x
Socket 1151
Chipset Intel B360
CPU SUPPORT 9th Gen Intel Core i9 LGA 1151 Processor Socket 1151 for 9th & 8th Intel Core i7 / i5 / i3 / Pentium / Celeron processor * 8th Generation Intel Core™ Processor Family only support 300-Series. * Please refer to www.biostar.com.tw for CPU support list.
MEMORY Supports Dual Channel DDR4 1866/ 2133/ 2400/ 2666 2 x DDR4 DIMM Memory Slot, Max. Supports up to 32 GB Memory Each DIMM supports non-ECC 4/8/16GB DDR4 module * Please refer to www.biostar.com.tw for Memory support list.
INTEGRATED VIDEO By CPU model Supports DX12 Supports HDCP
STORAGE 4 x SATA III Connectors (6Gb/s) 1 x M.2 (M Key) Socket: Supports M.2 Type 2242/ 2260/ 2280 SSD module Supports SATA III (6Gb/s) SSD
LAN Realtek LAN Chip 10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability
AUDIO CODEC ALC887 7.1 Channels, High Definition Audio
USB 6 x USB 3.1(Gen1) ports (4 on rear I/Os and 2 via internal header) 6 x USB 2.0 ports (2 on rear I/Os and 4 via internal header)
EXPANSION SLOT 11 x PCIe 3.0 x1 Slot 1 x PCIe 3.0 x16 Slot * Maximum VGA cards mining support are depending on VGA Driver or mining software.
REAR I/O 1 x PS/2 Mouse 1 x PS/2 Keyboard 1 x VGA Port 1 x HDMI Port 1 x LAN port 2 x USB 2.0 Ports 4 x USB 3.1(Gen1) Ports 3 x Audio Jack
INTERNAL I/O 4 x SATA III Connectors (6Gb/s) 2 x USB 2.0 Header (each header supports 2 USB 2.0 ports) 1 x USB 3.1(Gen1) Header (each header supports 2 USB 3.1(Gen1) ports) 1 x 8-Pin Power Connector 2 x 24-Pin Power Connectors 2 x 6-Pin PCIe Power Connectors 1 x CPU Fan Connector 2 x System Fan Connectors 1 x Front Panel Header 1 x Front Audio Header 1 x COM Serial Header 1 x Clear CMOS Header
H/W MONITORING CPU / System Temperature Monitoring CPU / System Fan Monitoring System Fan Monitoring Smart / Manual CPU Fan Control System Voltage Monitoring
DIMENSION ATX Form Factor Dimension: 29.5cm x 21.0cm ( W x L )
OS SUPPORT Supports Windows 10(64bit) / 11(64bit) ※Biostar reserves the right to add or remove support for any OS with or without notice.
BUNDLE SOFTWARE BullGuard
ACCESSORIES 2 x SATA Cable 1 x I/O Shield 1 x DVD Driver 1 x User Manual
FEATURES PCI-E Slot Detection BIOS Boot Screen
Our frames fit a maximum of 6 - 12 GPUs. You can start with one card and keep adding up to 12. Pick your prefered number of GPU Slots. Highest quality iron material, with the finest craftsmanship. Thickness of steel on top brackets of the graphics card holder is 1.5 mm, bottom base for motherboard 0.9 mm

Mining rig frame dimensions & number of fan spaces

GPU Slots (option) 6 8 12
Width 500mm 605mm 725mm
Height 240mm 240mm 240mm
Depth 268mm 268mm 268mm
Fans 4 5 6
Colour: Jet Black * Power switch cable included with every case. * Comes flat packed, IKEA style. Easy to assemble. Included in the box: frame, base board, riser support bar, power switch, screws, motherboard stand-offs. (Graphic cards, motherboard, risers, PSU not included, only for illustration purposes.) It can be used for bitcoin mining rig (if you use Nicehash), Ethereum mining rig or any other cryptocurrency coin. Other rig tools and hardware also available in our shop.

Video Instruction

 
Pre Build GPU Mining Bundle with your choice of an operating system. Please allow up to 10 days for dispatch. Each rig consist of: 1x Intel Motherboard (6 GPU Slots comes with an ordinary motherboard such as MSI Z490-A or similiar) (9 GPU Slots comes with Biostar TZ590 motherboard) 1x Intel Celeron Processor 1x RAM Module 1x GPU Steel Frame Size 1x PICO 160W Power Board PSU 1x Power Switch 1x 120GB SSD drive with mining software preinstalled (let me know your choice in the order notes, otherwise it will come with HiveOS as standard.)
GPU Risers RAM PSU Frame (cm) Fans GPU Power Cables
6 Slots 4GB 1200W 6 4GB 1x 1200W 60.5x24x26.8 5 12
6 Slots 8GB 1200W 6 8GB 1x 1200W 60.5x24x26.8 5 12
6 Slots 4GB 1950W 6 4GB 1x 1200W + 1x750W 60.5x24x26.8 5 12
6 Slots 8GB 1950W 6 8GB 1x 1200W + 1x750W 60.5x24x26.8 5 12
6 Slots 4GB 2400W 6 4GB 2x 1200W 60.5x24x26.8 5 12
6 Slots 8GB 2400W 6 8GB 2x 1200W 60.5x24x26.8 5 12
9 Slots 4GB 1950W 9 4GB 1x 1200W + 1x750W 72.5x24x26.8 6 18
9 Slots 8GB 1950W 9 8GB 1x 1200W + 1x750W 72.5x24x26.8 6 18
9 Slots 4GB 2400W 9 4GB 2x 1200W 72.5x24x26.8 6 18
9 Slots 8GB 2400W 9 8GB 2x 1200W 72.5x24x26.8 6 18
Compatible with the following Server Power Supplies:

DPS-800GB A DPS-1200FB A DPS-1200QB A PS-2751-5Q PS-2751-LF-1F HSTSN-PL12 DPS-700LB D PS-2112-5L DPS-750RB A

PCIE Riser Card 010S PLUS Extender for GPU Mining Rigs. Features 8 solid-state capacitors & onboard VRM (voltage regulator) for maximum power stability. Package includes:
  • PCIE riser board
  • PCIE to usb adapter
  • 60cm USB 3.0 cable
580 XT designed for gpu mining.
Aesthetic
COLOR Black
MATERIAL PBT + 30% Glass Fiber + VO Flame Retardant (Frame)
SECONDARY MATERIAL PBT + 30% Glass Fiber + VO Flame Retardant (Blade)
Specifications
COOLING DEVICE Cooling Fan
RPM (RATED MAXIMUM) 2500 -rpm
Manufacturer
BRAND
VEDDHA
Package
PACKAGE TYPE Plain
PACKAGE CONTENTS 1*Cooling Fan
Dimensions | metric
DEPTH 25 mm
HEIGHT 120 mm
WIDTH 120 mm
PRODUCT WEIGHT 180 g
Weight90 g1000 g2000 g9500 gN/A60 g1000 g90 g
DimensionsN/AN/AN/A600 × 400 × 400 mmN/AN/AN/AN/A
Additional information
Weight 90 g
Brand

Weight 1000 g
Brand

Weight 2000 g
Brand

Weight 9500 g
Dimensions 600 × 400 × 400 mm
Brand

Brand

Weight 60 g
Brand

Weight 1000 g
Brand

Weight 90 g
Brand