| Content |
ASUS TUF Gaming GeForce RTX 3060 V2 OC Edition 12GB GDDR6 buffed-up design with chart-topping thermal performance. - NVIDIA Ampere Streaming Multiprocessors: The building blocks for the world’s fastest, most efficient GPUs, the all-new Ampere SM brings 2X the FP32 throughput and improved power efficiency.
- 2nd Generation RT Cores: Experience 2X the throughput of 1st gen RT Cores, plus concurrent RT and shading for a whole new level of ray tracing performance.
- 3rd Generation Tensor Cores: Get up to 2X the throughput with structural sparsity and advanced AI algorithms such as DLSS. These cores deliver a massive boost in game performance and all-new AI capabilities.
- OC edition: Boost clock 1882 MHz (OC mode)/ 1852 MHz (Gaming mode)
- Axial-tech fan design: has been newly tuned with a reversed central fan direction for less turbulence.
- Dual ball fan bearings: can last up to twice as long as sleeve bearing designs.
- An all-aluminum shroud: and metal backplate enhance durability.
- GPU Tweak II: provides intuitive performance tweaking, thermal controls, and system monitoring.
Built TUF The TUF GAMING GeForce RTX 3060 has been stripped down and built back up to provide more robust power and cooling. A new all-metal shroud houses three powerful axial-tech fans that utilize durable dual ball fan bearings. Fan rotation has been optimized for reduced turbulence, and a stop mode brings all three fans to a halt at low temps. Beneath, a thick heatsink keeps thermals under tight control. Additional features, including TUF components, Auto-Extreme Technology, and a backplate vent make the TUF a proper powerhouse. For builders looking for a new “old faithful”, this card has your back. Axial-Tech Upgrades TUF Gaming cards leverage our tried-and-true Axial-tech fan design, with three fans working in tandem to satisfy the thermal demands of NVIDIA’s new high-octane design. The fans rely on dual ball fan bearings to ensure consistent performance and increased longevity compared to sleeve bearings and other bearing types. New Directions The two side fans spin counterclockwise to reduce turbulence. And to eliminate unnecessary noise, a stop mode halts all fans when the GPU temp falls below 50 degrees and power consumption is low.
MaxContact To get heat up off the die and into the heatsink array, we’ve engaged MaxContact technology to polish the surface of the heat spreader and improve smoothness at the microscopic level. The extra flatness allows for better contact with the die for enhanced thermal transfer. 2.7-Slot Design The heat spreader draws heat up into heat pipes that carry it through a fin stack that fills most of the card’s large, 2.7-slot footprint.
TUF Components Components are selected for TUF Gaming graphics cards based on their durability and performance. In addition to top-shelf chokes and MOSFETs, capacitors that meet military-grade certification make the TUF stand tall amongst the competition. The components are soldered to the PCB using our advanced Auto-Extreme automated manufacturing process. Smooth joints on the rear of the PCB and the elimination of human errors ensure each graphics card meets our rigorous specifications. Finally, to ensure flawless performance when it counts, the cards are subjected to a gruelling 144-hour validation trial. Fresh Shroud An all-aluminium shroud adds robust protection to TUF Gaming graphics cards and a no-nonsense industrial design and grayscale colourway fits into any build with ease. It’s Cooler Out Back The underside of the card reveals further improvements. Most of the rear is swathed in a protective metal backplate that prominently features a wide vent. The vent allows hot air to escape towards chassis exhaust fans instead of being recycled back into the cooler. Stainless steel is used for the I/O bracket to protect ports and provide a more secure mount. A conveniently placed Dual Bios switch allows customization of the card’s default performance profile without software.
Functional Front The top-side RGB element can be customized to display a range of aesthetic and functional effects and also synced with other ASUS components to enable uniform lighting. An 8-pin connector fulfils the power demands of the GeForce RTX 3060, and onboard LEDs light up if the power connectors are not plugged in correctly.
GPU TWEAK II The ASUS GPU Tweak II utility takes graphics card tuning to the next level. It allows you to tweak critical parameters including GPU core clocks, memory frequency, and voltage settings, with the option to monitor everything in real-time through a customizable on-screen display. Advanced fan control is also included along with many more features to help you get the most out of your graphics card.
Description Specification - Chipset Manufacturer: Nvidia
- Interface: PCI Express 4.0
- Graphics Chipset: Nvidia RTX 3060
- Memory Size: 12GB
- Memory Type: DDR6
- Memory Interface: 192-bit
- Core Clock: OC Mode - 1882 MHz (Boost Clock)
Gaming Mode - 1852 MHz (Boost Clock) - Memory Clock: 15 Gbps
- CUDA Cores / Stream Processors: 3584 CUDA Cores
- Outputs: 2 x HDMI
3 x DisplayPort - HDCP Support: Yes
- Resolution: Digital Max Resolution 7680 x 4320
- DirectX Support: DirectX 12 Ultimate
- Multi-GPU Support: None
- Max Display Support: 4
- Cooling: Axial-tech fan design
Dual ball fan bearings
Maxcontact - PSU Requirements: 750W or greater recommended
- Connectors Required: 1 x 8-pin PCIe power
- Software: ASUS GPU Tweak II & GeForce Game Ready Driver & Studio Driver
- Features: See Overview / Video
- Dimensions: 30.1 x 14.3 x 5.4 cm
- Slot Size: 2.7 Slot
- Accessories: 1 x TUF certificate of Reliability
1 x Collection card
1x Speedsetup Manual - Package Type: Retail
- #Hide#Lighting Effects: Yes
- #Hide#HDMI: Yes (HDMI)
- #Hide#DisplayPort: Yes (DisplayPort)
- Package Weight: 1.6800 kg
- Warranty: 3 Years
|
Model
|
Biostar TB360-BTC PRO 2.0
|
| Version |
6.x |
| Socket |
1151 |
| Chipset |
Intel B360 |
| CPU SUPPORT |
9th Gen Intel Core i9 LGA 1151 Processor
Socket 1151 for 9th & 8th Intel Core i7 / i5 / i3 / Pentium / Celeron processor
* 8th Generation Intel Core™ Processor Family only support 300-Series.
* Please refer to www.biostar.com.tw for CPU support list. |
| MEMORY |
Supports Dual Channel DDR4 1866/ 2133/ 2400/ 2666
2 x DDR4 DIMM Memory Slot, Max. Supports up to 32 GB Memory
Each DIMM supports non-ECC 4/8/16GB DDR4 module
* Please refer to www.biostar.com.tw for Memory support list. |
| INTEGRATED VIDEO |
By CPU model
Supports DX12
Supports HDCP |
| STORAGE |
4 x SATA III Connectors (6Gb/s)
1 x M.2 (M Key) Socket:
Supports M.2 Type 2242/ 2260/ 2280 SSD module
Supports SATA III (6Gb/s) SSD |
| LAN |
Realtek LAN Chip
10/ 100/ 1000 Mb/s auto negotiation, Half / Full duplex capability |
| AUDIO CODEC |
ALC887
7.1 Channels, High Definition Audio |
| USB |
6 x USB 3.1(Gen1) ports (4 on rear I/Os and 2 via internal header)
6 x USB 2.0 ports (2 on rear I/Os and 4 via internal header) |
| EXPANSION SLOT |
11 x PCIe 3.0 x1 Slot
1 x PCIe 3.0 x16 Slot
* Maximum VGA cards mining support are depending on VGA Driver or mining software. |
| REAR I/O |
1 x PS/2 Mouse
1 x PS/2 Keyboard
1 x VGA Port
1 x HDMI Port
1 x LAN port
2 x USB 2.0 Ports
4 x USB 3.1(Gen1) Ports
3 x Audio Jack |
| INTERNAL I/O |
4 x SATA III Connectors (6Gb/s)
2 x USB 2.0 Header (each header supports 2 USB 2.0 ports)
1 x USB 3.1(Gen1) Header (each header supports 2 USB 3.1(Gen1) ports)
1 x 8-Pin Power Connector
2 x 24-Pin Power Connectors
2 x 6-Pin PCIe Power Connectors
1 x CPU Fan Connector
2 x System Fan Connectors
1 x Front Panel Header
1 x Front Audio Header
1 x COM Serial Header
1 x Clear CMOS Header |
| H/W MONITORING |
CPU / System Temperature Monitoring
CPU / System Fan Monitoring
System Fan Monitoring
Smart / Manual CPU Fan Control
System Voltage Monitoring |
| DIMENSION |
ATX Form Factor Dimension: 29.5cm x 21.0cm ( W x L ) |
| OS SUPPORT |
Supports Windows 10(64bit) / 11(64bit)
※Biostar reserves the right to add or remove support for any OS with or without notice. |
| BUNDLE SOFTWARE |
BullGuard |
| ACCESSORIES |
2 x SATA Cable
1 x I/O Shield
1 x DVD Driver
1 x User Manual |
| FEATURES |
PCI-E Slot Detection BIOS Boot Screen |
| Full Performance in a Small Form Factor Solution NVIDIA GPUs power the world's most advanced desktop workstations, providing the visual computing power required by millions of professionals as part of their daily workflow. All phases of the professional workflow, from creating, editing, and viewing 2D and 3D models and video, to working with multiple applications across several displays, benefit from the power that only a discreet GPU solution can provide. NVIDIA entry level professional GPUs provide advanced features and performance far beyond what is available with integrated GPU solutions - all in a low-profile package, enabling deployment in a wide range of small form factor workstations. Step up to the power of an NVIDIA discreet professional GPU. The NVIDIA Turing architecture provides significant performance improvements with NVIDIA T1000, resulting in more than 50% graphics performance, compared to the previous generation P1000. Ultra-fast GDDR6 graphics memory technology provides twice the memory bandwidth of the previous generation. NVIDIA T1000 Performance and Features Value for End-Users - Powered by NVIDIA Turing GPU architecture, NVIDIA T1000 delivers more performance than the previous generation.
- Allows you to work with larger models, scenes, and assemblies, with higher levels of interactivity during design and visualization.
- Ensures hardware compatibility and stability through NVIDIA support of the latest OpenGL, DirectX, Vulkan, and NVIDIA CUDA standards, deep ISV developer engagements, and certification with over 100 professional software applications.
- Enables creation and playback of H.264 and HEVC video, with dedicated decode and encode engines that are independent of the 3D graphics and compute pipeline.
- With support for DisplayPort 1.4, NVIDIA T1000 can drive display resolutions for up to four 5K displays or two 8K displays per card. Combine up to four NVIDIA T1000s in a single system to create display walls or other immersive environments.
- Experience stunning visuals with HDR color support and up to 120 Hz refresh rates for 4K displays with 30-bit color.
Value for IT Administrators - Experience higher-quality products, driven by power-efficient hardware designs and component selection, for optimum operational performance, durability, and longevity.
- Expect maximum uptime thanks to exhaustive product testing in conjunction with leading OEMs and system integrators that simulate the most demanding real-world conditions.
- Remotely monitor and manage NVIDIA T1000s deployed in your enterprise by integrating the NVIDIA Enterprise Management toolkit within your IT asset management framework.
- Scale up NVIDIA T1000 deployment to hundreds of workstations using the powerful driver installer included with the NVIDIA Enterprise Management toolkit.
- Simplify software driver deployment through a regular cadence of long-life, stable driver releases based on a robust feature-development and quality-assurance process.
NVIDIA T1000 Solutions Manufacturing - Enables designers and engineers to create models with larger numbers of components and more complex assemblies.
- Offers support for up to three 4K displays for an expansive desktop that allows designers to work with multiple apps, simultaneously.
- Supports displays at up to 8K resolution. Combine multiple NVIDIA T1000 cards for massive visual workspaces.
Media and Entertainment - Allow editors to work in real time with HDR content and up to 5K full resolution.
- Enables artists working with 3D models or 2D imagery to realize better performance with assets stored in dedicated high-performance graphics memory.
- Creates and plays back ultra-high quality HDR content with H.264/HEVC encode and decode engines.
- Combine multiple NVIDIA T1000 cards to create expansive visual display solutions.
AEC - Allows architects to create larger models, view 2D and 3D designs and plans, in real-time, with no lag.
- Equips urban designers with the tools to create models with more detail and complexity.
Financial Services - Drives up to four 4K displays per card directly with onboard mini-DisplayPort latching connectors. Creates expansive visual environments with up to 16 total displays, using four NVIDIA T1000 cards per system.
- Manages multiple windows across multiple applications and desktops with NVIDIA RTX Desktop Manager software.
- Improves productivity by running multi-application workflows without performance impact.
- Uses minimal power, resulting in lower TCO.
Description Specification - Chipset Manufacturer: Nvidia
- Interface: PCI Express 3.0
- Graphics Chipset: Nvidia T1000
- Memory Size: 4GB
- Memory Type: DDR6
- Memory Interface: 128-bit
- CUDA Cores / Stream Processors: 896 CUDA Cores
- Outputs: 4 x Mini DisplayPort
- HDCP Support: Yes
- Resolution: 7680 x 4320 at 60 Hz
- DirectX Support: DirectX 12
- Max Display Support: 4
- Cooling: Active Fansink
- PSU Requirements: Max Power Consumption: 50W
- Connectors Required: -
- Features: See Overview
- Slot Size: 1 Slot
- Accessories: Attached low-profile (SFF) bracket
T1000 LP Bracket in the box
No Manual or adaptors - Package Type: OEM
- #Hide#Low Profile: Yes (Low Profile)
- #Hide#DisplayPort: Yes (DisplayPort)
- Package Weight: 0.5850 kg
- Warranty: 3 Years
| 580 XT designed for gpu mining. |
