| Description | ARCTIC 120mm P12 Pressure Optimised PWM PST ARGB Case Fan, Fluid Dynamic, 12 LEDs, 0-2000 RPM, 0dB Mode, Black | Be Quiet! Light Base 900 FX ARGB Gaming Case w/ Glass Front & Side, E-ATX, Invertible, 4x ARGB Fans, 3M ARGB Strip & Controller, USB-C, Asus BTF Compatible, Bla | ARCTIC F12 120mm PWM PST Case Fan w/ Cable Splitter, Black, Fluid Dynamic, 230-1350 RPM | TP-LINK (TAPO A201) 2.5W Solar Panel for TAPO Battery Cameras, IP65, 4m Charging Cable |
| Content |
Semi-Passive 120 mm Fan with Digital A-RGB
- Optimised for high static pressure
- Ideal choice on heatsinks, radiators and (partly-) covered case vents
- PWM Sharing Technology (PST) regulates fan speed synchronously
- Static Pressure: 1.85 mm H2O
RGB For Full Colour Control The P12 PWM PST A-RGB 0dB has 12 digital A-RGB LEDs in the fan scar. These can be controlled independently of each other and are compatible with the common A-RGB standards of leading motherboard manufacturers. The fan can thus be fully illuminated directly via the A-RGB mainboard connector or via an external controller and synchronised with the illumination of other hardware.
0DB Mode - Zero RPM The speed of the fan can be throttled down to standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required.
Maximum Smoothness, Minimum Vibration The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. In addition, the P12 PWM PST A-RGB 0dB has rubberised contact surfaces and thus reduces audible vibrations to a minimum.
Optimised For High Static Pressure The P12 PWM PST A-RGB 0dB operates with a focused airflow and a high static pressure. The fan thus guarantees extremely efficient cooling, even with increased air resistance, and is therefore suitable for use on heat sinks, radiators and filters.
0 TO 2000 RPM Controlled Via PWM PST With a wide speed range and the innovative PWM Sharing Technology (PST), the fan speed of the P12 PWM PST A-RGB 0dB can be controlled synchronously with all other fans. This reduces noise to a minimum while guaranteeing maximum cooling performance.
High Quality Plain Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. In this way, less heat develops, less bearing noise is generated and the service life of the fan is extended.
Description Specification - Type: 120mm Case Fan
- Fan Connector(s): 4-pin
- Fan Controller: PWM
- #Hide#Max RPM: 2000 RPM
- Rotation Speed: 0 - 2000 RPM
- Fan Bearing: Fluid Dynamic bearing
- Air Flow: "48.8 CFM | 82,91 m3/h"
- Installation: Screws
- #Hide#LED Lighting: Yes
- Colour: Black
- LED Lighting: 12 digital ARGB LEDs in the fan scar
3-Pin 5V-DI-GND Connector + 3-Pin Socket - Material: Rubberised contact surfaces
- Dimensions: 120 x 120 x 25 mm
- Weight: 131g
- Noise level: 0.3 Sone
0dB mode - Power: Fan:
Typical Voltage: 12 V DC
Current: 0.11 A
RGB:
Typical Voltage: 12 V
Current: 0.11A - Additional Features: See Overview / Video
- Package Contents: 1 x P12 PWM PST A-RGB fan
4 x Mounting Screws - Package Type: Retail
- Package Weight: 0.2000 kg
- Warranty: 6 Years
- #Hide#Colour: Black
|
Exceptional from every angle Be prepared for virtually any PC component available and make Light Base 900 FX Black with ARGB fans your creative show case. - Fully windowed front and side panel for a stunning panoramic view on all your PC components
- Impressive illumination from every angle with a massive ARGB LED strip
- 4 Light Wings 140mm PWM fans for high airflow and quiet operation
- Can be switched to inverted or horizontal layout in literal seconds thanks to intuitive handling
- Extra spacious design for up to two 420mm radiators at the same time and an E-ATX motherboard
- Support for motherboards with backside connector design
Panorama design for perfect visibility
You deserve to show off what you got. Large window panels on the front and the side allow you to watch your PC components at work anytime. This makes Light Base 900 FX Black the perfect choice as your show case.
3 meters of LEDs
Light Base 900 FX Black is predetermined for the big show. Nothing proves that more than the massive ARGB LED strip which is visible from all angles. The 3m long strip consists of 172 LEDs. With an included ARGB controller button and even more colors and modes with motherboard synchronization, you can make Light Base 900 FX Black truly your own. Express yourself!
LED Case Fans
Light Base 900 FX Black comes with 4 pre-installed Light Wings fans. One fan is installed as rear exhaust, 3 Light Wings 140mm PWM fans with reversed fan blades are pre-installed on the side mounting. The reverse fans make sure your system is still an eye-catcher when installed as a side intake. Their 7 airflow-optimized fan blades not only reduce noise-generating turbulences but also ensure that this fan provides the performance that is needed, even in demanding configurations.
Change the layout in literal seconds
It takes longer to read this text than to invert Light Base 900 FX Black. With its relocatable feet, you can invert the PC case literally in seconds. You can also choose a horizontal layout, which is executed just as quick. No matter which layout your gaming room requires: Light Base 900 FX Black delivers.
Large dimensions for endless creativity
The 4 pre-installed fans can be expanded to up to 10 in total, making Light Base 900 FX Black extremely versatile. With its extra spacious design, it can hold up to two 420mm radiators simultaneously, an E-ATX motherboard and even the most powerful graphics cards. Thanks to the two-chamber design, drives and cables are neatly tucked in the back and do not get in the way of airflow.
A new level of convenience
The detachable radiator and fan brackets in the top and bottom make installation of your cooling setup very easy. Each bracket fits a 420mm radiator. On top of that, you can install another radiator with up to 360mm length in the side, for a whopping 3 radiators. Additionally, Light Base 900 FX Black comes with 2 ARGB and PWM hubs that offer 12 connectors in total. Their positions at the top and bottom allow you to conveniently connect your hardware.
Hold my GPU
Light Base 900 FX Black features a flexible VGA holder that subtly prevents your GPU from sagging. The best part: This holder works in any orientation and with a horizontally or vertically installed graphics card. The result is a clean look even if you use big and heavy graphics cards.
Support for motherboards with backside connector design
The motherboard tray fully supports backside connector designs like Asus BTF (Back to Future), MSI Project Zero, and Gigabyte Project Stealth, for a true and cable-free view.
Description Specification - Form Factor: E-ATX
- #Hide#Small Form Factor: No
- Power Supply Wattage: No PSU
- Motherboard Support: "E-ATX, XL-ATX, ATX, Micro ATX, Mini ITX"
- #Hide#Window(s): Yes (Window)
- #Hide#LED Lighting: Yes (LED Lighting)
- Connectors / Controls: 1 x USB 3.2 Gen2 Type-C
2 x USB 3.2 Type-A
Mic + Audio - #Hide#Max Radiator Support: 420mm
- Drive Bays: 1 x 3.5"" slots (scope of delivery)
2 x 3.5"" slots (max.)
4 x 2.5"" slots (scope of delivery)
6 x 2.5"" slots (max.) - Expansion Slots: 8 x Expansion Slots
- Cooling System: Included:
Side: 3 x Light Wings Reversed ARGB PWM 140mm Fans
Rear: 1 x Light Wings ARGB PWM 140mm Fan
2 ARGB and PWM Hubs included
Fan Mounts:
Front: None
Top: 3 x 140 / 3 x 120 mm
Side: 3 x 140 / 3 x 120 mm
Rear: 1 x 140 / 1 x 120 mm
Bottom: 3 x 140 / 3 x 120 mm - .:
Radiator Support:
Front: None
Top: Up to 420 mm
Side: Up to 360 mm
Rear: Up to 140 mm
Bottom: Up to 420 mm - #Hide#Back-Connect MB Support: Yes (Back-Connect)
- Back-Connect MB Support: Yes
- Colour: Black
- Material: Top cover: Steel
Front panel: Glass
Side panel: Steel
Side panel window: Glass
Stands: ABS - Compatibility: GPU max height:
495 mm
CPU cooler max height:
190 mm
PSU max length:
225 mm
- Weight/Dimensions: 16.8 kg
Excl. stands (LxWxH): 532 x 327 x 465 mm
Incl. stands (LxWxH): 532 x 327 x 484 mm - Additional Features: Fully windowed front and side panel
Illumination from every angle with massive ARGB LED strip
Can be switched to inverted or horizontal layout
Back connector motherboard support
2 ARGB and fan hubs with 12 connectors in total
See Overview for more details
- Accessories: Screw set (Drives/Motherboard)
1 x Additional standoffs
12 x Cable ties
VGA holder
VGA holder for inverted layout - Package Weight: 18.2000 kg
- Warranty: 3 Years
| 4-Pin PWM fan with standard case
Long Service Life The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life Perfect Case Fan Regulation with PWM The PWM function allows the motherboard to run the fan precisely at its necessary speed. This guarantees the required cooling and minimizes the noise level. PWM Sharing Technology (PST) Lowers Noise If you want to improve the cooling efficiency of your computer you get several case fans working in parallel (since it takes 10 fans to double the noise level). But what does it help if they don't work together? The PST assures that all of your fans listen to one control signal. E.g. you share the CPU Cooler's PWM signal and assure that your case fans stand down at low load and spin up whenever necessary Innovative Design Enables Quiet and Efficient Ventilation The innovative design of the fan blades improves the air flow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimzing the noise level yet delivering the desired airflow and pressure.
Description Specification - Type: 120mm Case Fan
- Fan Connector(s): 4-pin
- Fan Controller: PWM
- #Hide#Max RPM: 1350 RPM
- Rotation Speed: 230 - 1350 RPM
- Fan Bearing: Fluid Dynamic
- Air Flow: 53CFM (90.1 m3/h)
- Installation: Screws
- #Hide#LED Lighting: No
- Colour: Black
- LED Lighting: -
- Dimensions: 120 x 120 x 25 mm
- Weight: 109 g
- Noise level: "0.3 Sone (@ 1,350 RPM)"
- Power: 12V DC
- Additional Features: See Overview
- Package Type: Retail
- Package Weight: 0.1470 kg
- Warranty: 6 Years
- #Hide#Colour: Black
|
Solar Panel - Works with Tapo Battery Cameras: Compatible with all Tapo Battery Cameras, enabling your Tapo battery camera to protect you all year round.
- Flexible Installation Options: Install it separately with a 4m / 13 ft extra-long cable or alongside the camera, empowering you to discover optimal spots for seamless monitoring.
- Non-Stop Power Supply: Enjoy a non-stop power supply with high-efficiency solar charging. You need only 45 minutes of standard sunlight a day to keep your cameras working.
- High-Efficiency Solar Cells: Made of premium monocrystalline silicon cells, Tapo A201 captures abundant solar energy and converts into electric energy efficiently.
- IP65 Weatherproof: Keep your solar panel durable from rain and dust with IP65 weatherproof.
- Flexible Light Capture: Mount your solar panel on the wall or roof and adjust its angle flexibly to capture enough sunlight with an angle-adjustable bracket.
Flexible Solar Installation Options Designed for seamless integration, the Tapo A201 offers a sleek unified look or flexible positioning with a 4m charging cable for maximum sunlight exposure. Enjoy green, endless power. Works with Tapo Battery Cameras
Compatible with all Tapo Battery Cameras, enabling your Tapo battery camera to protect you all year round. Check all supported models >> High-Efficiency Solar Charging Daily 45 minutes of direct sunlight charges Tapo Battery Cam for all-day use, thanks to its premium monocrystalline silicon cells and 2.5W maximum charging power. Flexibly Adjustable Angle for Sufficient Sunlight Mount your solar panel on the wall or roof and adjust its angle flexibly to capture enough sunlight with an angle-adjustable bracket. IP65 Weatherproof
Offers reliable performance and keeps your battery cameras stay charged even in harsh environments with rain and dust.
Description Specification - Designed For: TP-Link TAPO Battery Cameras
- Type Of Charger: Solar Charger
- Compatibility: "TAPO battery-powered cameras like C400, C410, C420, C425 and more
NOTE: The A201 solar panel can only connect to one camera" - Connectors: Output Port: Type-C
*A Type-C to Micro USB adapter (Included) is required for a camera with a Micro USB charging port - Output: Charging Voltage: 5.2 V
Max Charging Power: 2.5 W - IP Rating: IP65 Weatherproof
- Additional Features: "High-Efficiency Solar Cells
4m Charging Cable
Mount your solar panel on the wall or roof
Adjustable angle
45 minutes of sunlight a day can keep TAPO cameras working 24/7
Operating Temperature: -20°C~45°C (-4°F~114°F)
Storage Temperature: -40°C~60°C (-40°F~140°F)
Operating Humidity: 10%~90%RH, Non-condensing
Storage Humidity: 5%~90%RH, Non-condensing" - Weight/Dimensions: 173.42 x 120.42 x 15.7 mm
- Package Contents: 1 x Tapo A201 Solar Panel
1 x Adjustable Mounting Bracket
6 x Mounting Screws
6 x Mounting Anchors
1 x Base Cover
6 x Waterproof Gaskets
2 x Screw Caps
1 x Cable Zip Tie
1 x Extension Wire
1 x Type-C to Micro USB Adapter
2 x Mounting Template
Quick Start Guide - Package Type: Retail
- Package Weight: 0.6000 kg
- Warranty: 2 Years
|
