| Description | TP-LINK (SG3452XMPP) Omada 48-Port Gigabit and 4-Port 10GE SFP+ L2+ Managed Switch with 40-Port PoE+ & 8-Port PoE++, Rackmountable | ARCTIC P9 PWM PST CO 92mm Case Fan w/ Cable Splitter for Continuous Operation, Black, Dual Ball Bearing, 200-3000 RPM, 0dB Mode |
- Dual Protocol Support:Automatically identifies and runs both NVMe and SATA protocol M.2 drives.
- RTL9210B Control Chip:Provides stable transmission, intelligent power management, and wide system compatibility.
- Direct USB-C Connection:Integrated Type-C interface connects directly to modern laptops, desktops, and Android phones (via OTG).
- Wide SSD Support:Compatible with sizes 2230, 2242, 2260, and 2280.
- Driver-Free:Plug and play on Windows, Mac OS, Linux, and Android.
|
| Content |
Omada 48-Port Gigabit and 4-Port 10GE SFP+ L2+ Managed Switch with 40-Port PoE+ & 8-Port PoE++ - 4x 10 Gbps SFP+ slots
- 8x Gigabit 802.af/at/bt PoE++ ports (Max 90 W PoE budget for each port)
- 40x Gigabit 802.3af/at PoE+ ports (Max 30 W budget for each port)
- 750 W total PoE budget
- Centralized cloud management via the web or the Omada app†
- Standalone management via web, CLI, SNMP, and RMON
- Static Routing helps route internal traffic for higher efficiency
- VLAN, ACL, QoS, IGMP Snooping, OAM, and DDM
- ERPS supports rapid protection and recovery in a ring topology
- Durable metal casing and rack-mountable design
Description Specification - Rackmountable: Yes
- Managed: Yes
- Number of Ports: 48
- Max RJ45 Transfer Rate: 10/100/1000 Mbps
- #Hide#Max SFP Transfer Rate: 10G SFP
- Interface(s): "48 x 10/100/1000 Mbps RJ45 Ports (8× PoE++, 40× PoE+)
4 x 10G SFP+ Slots
1 x RJ45 Console Port
1 x Micro-USB Console Port" - PoE Ports (RJ45): Standard: 802.3at/af/bt compliant
PoE++ Ports: Ports 1~8 (up to 90 W PoE Output per Port)
PoE+ Ports: Ports 9~48 (up to 30 W PoE Output per Port)
Power Budget: 750 W - Switching Capacity: 176 Gbps
- Power Supply: 100-240 V AC~50/60 Hz
Max Power Consumption: 913.4 W (110V/60Hz) ( with 750 W PD connected) - Dimensions: (WxDxH) 440 x 330 x 44 mm
- Mac Address Table: 16 K
- Packet Forwarding Rate: 130.9 Mpps
- Jumbo Frame: 9 KB
- Additional Features: Automatic Device Discovery
Batch Configuration
Batch Firmware Upgrading
Intelligent Network Monitoring
Abnormal Event Warnings
Unified Configuration
Reboot Schedule
ISP Features:
L2PT (Layer 2 Protocol Tunneling)
Device Link Detect Protocol (DLDP)
PPPoE ID Insertion
ERPS
802.3ah Ethernet Link OAM
DDM
sFlow - Quality of Service: "8 priority queues
802.1p CoS/DSCP priority
Bandwidth Control: Port/Flow-based Rating Limiting
Smoother Performance
Action for Flows: QoS remark (802.1P Remark, DSCP Remark)
Queue scheduling: SP (Strict Priority), WRR (Weighted Round Robin), SP+WRR" - Layer Features: "L2 and L2+ Features
128 IP Interfaces: Support IPv4/IPv6 Interface
Static Routing: 48 IPv4/IPv6 Static Routes
Static ARP: 128 static entries
512 ARP Entries
Proxy ARP
Gratuitous ARP
DHCP Server
DHCP Relay: DHCP Interface Relay, DHCP VLAN Relay
DHCP L2 Relay
Link Aggregation
Spanning Tree Protocol
Loopback Detection
802.3x Flow Control
Mirroring
" - .: "L2 Multicast
Supports 1000 (IPv4, IPv6) IGMP groups
IGMP Snooping
IGMP Authentication
Multicast VLAN Registration (MVR)
MLD Snooping
Multicast Filtering: 256 profiles and 16 entries per profile" - VLAN: "VLAN Group: Max 4K VLAN Groups
802.1q Tagged VLAN
MAC VLAN: 30 Entries
Protocol VLAN: Protocol Template 16, Protocol VLAN 16
Private VLAN
GVRP
VLAN VPN: VLAN Mapping, VLAN Replace
Voice VLAN" - Access Control: "Time-based ACL
MAC ACL: Source MAC, Destination MAC, VLAN ID, User Priority, Ether Type
IP ACL: Source IP, Destination IP, Fragment, IP Protocol, TCP Flag, TCP/UDP Port, DSCP/IP TOS
Combined ACL
Packet Content ACL
IPv6 ACL
Policy: Mirroring, Redirect, Rate Limit, QoS Remark
ACL applies to Port/VLAN" - Security: IP-MAC-Port Binding
IPv6-MAC-Port Binding
DoS Defend
DHCP Filter
Static/Dynamic Port Security: Up to 64 MAC addresses per port
Broadcast/Multicast/Unicast Storm Control: kbps/ratio/pps control mode
802.1X
AAA (including TACACS+)
Port Isolation
Secure web management through HTTPS with SSLv3/TLS 1.2
Secure Command Line Interface (CLI) management with SSHv1/SSHv2
IP/Port/MAC-based access control - Management: "Omada App
Centralized Management
Cloud Access
Zero-Touch Provisioning
Management Features:
Web-based GUI
CLI through console port, telnet
SNMPv1/v2c/v3
SDM Template
DHCP/BOOTP Client
802.1ab LLDP/LLDP-MED
DHCP AutoInstall
Dual Image, Dual Configuration
CPU Monitoring
Cable Diagnostics
EEE
Password Recovery
SNTP
System Log" - Environment: Operating Temperature: 0–40°C (32–104°F)
Storage Temperature: -40–70°C (-40–158°F)
Operating Humidity: 10–90% RH non-condensing
Storage Humidity: 5–90% RH non-condensing - Package Contents: SG3452XMPP Switch
Power Cord
Quick Installation Guide
Rackmount Kit
Rubber Feet - Package Type: Retail
- Package Weight: 6.9000 kg
- Warranty: Limited Lifetime
- #Hide#POE: Yes
|
P9 PWM PST CO (Black) - 92 mm PWM Fan with Cable Splitter for Continuous Operation - Fan Speed: 200–3000 RPM (PWM controlled), 0 RPM below 5% PWM
- Airflow: 38.83 CFM
- Static Pressure: 3.12 mmH2O
- Fan Bearing: Dual Ball Bearing
- Typical Voltage: 12 V DC
- Start Up Voltage: 5 V DC
- Current: 0.12 A
- Cable Length: 400 mm + 80 mm Daisy-Chain Cable
- Connector: 4-Pin Fan Plug + 4-Pin Socket
- Operating Ambient Temperature: 0–40 °C
Powerful Cooling The P9 PWM PST CO is a powerful 92 mm fan with 200 to 3000 rpm.The fan delivers a static pressure of 3.12 mmH2O and generates an airflow of up to 38.83 cfm. It offers precise control of the fan speed via pulse width modulation (PWM) and is extremely efficient at 0.12 A. In addition, it has a 0 dB mode for silent operation in IDLE. Optimised for High Static Pressure The P9 PWM PST CO delivers a focused airflow and guarantees a good airflow even with particularly high static pressure. Therefore, the P9 PWM PST CO is also specially suitable for use on heat sinks, radiators, pinholes and filters. 0 dB Mode - Zero rpm The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. This enables the P9 PWM PST CO to be extremely flexible in adjusting the speed to optimally regulate the airflow for every case.
Designed for Continuous Operation The P9 PWM PST CO is equipped with two japanese ball bearings. This makes these fans particularly durable and resistant to external forces such as heat, dust and vibrations. This variant is therefore the ideal choice for 24/7 operation. 200 to 3000 rpm Regulated via PWM With a wide speed range and innovative PWM Sharing Technology (PST), the P9 PWM PST CO's fan speed can be controlled in sync with other fans. ARCTIC's PST fans come equipped with their own built-in daisy-chain solution, and, in addition to the plug-in connector, have another socket to which an additional fan or up to four other PST fans can be connected in series. Quality You Can Rely On
To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.
Description Specification - Type: 92mm Case Fan
- Fan Connector(s): 4-pin
- Fan Controller: PWM
- #Hide#Max RPM: 3000 RPM
- Rotation Speed: 200 - 3000 RPM
Zero RPM below 5% PWM - Fan Bearing: Dual Ball Bearing
- Air Flow: 38.83 CFM
- Installation: Screws
- #Hide#LED Lighting: No
- Colour: Black
- LED Lighting: -
- Dimensions: 92 x 92 x 25 mm
Cable Length: 400 mm + 80 mm Daisy-Chain Cable - Weight: 105 g
- Noise level: 0dB Mode - Zero RPM (below 5% PWM)
- Power: Typical Voltage: 12 V DC
Start Up Voltage: 5 V DC
Current: 0.12 A - Additional Features: See Overview
- Package Contents: 1 x P9 PWM PST CO
4 x Mounting Screws - Package Type: Retail
- Package Weight: 0.1240 kg
- Warranty: 6 Years
- #Hide#Colour: Black
| Universal Compatibility with Dual-Protocol Technology
Upgrade your storage toolkit with this versatile M.2 to USB 3.1 Type-C adapter. Powered by the advancedRealtek RTL9210B chipset, this riser card eliminates the confusion between different drive types. It supportsbothhigh-speed M.2 NVMe (PCIe) and standard M.2 SATA (NGFF) SSDs, making it the perfect all-in-one solution for data recovery, drive cloning, or building a portable high-speed flash drive.
High-Performance Transfer
Experience read speeds up to1000MB/s(dependent on drive speed). This board utilizes the USB 3.1 Gen 2 interface for maximum bandwidth but maintains full backward compatibility with USB 3.0 and USB 2.0 ports.
Key Features:
- Dual Protocol Support:Automatically identifies and runs both NVMe and SATA protocol M.2 drives.
- RTL9210B Control Chip:Provides stable transmission, intelligent power management, and wide system compatibility.
- Direct USB-C Connection:Integrated Type-C interface connects directly to modern laptops, desktops, and Android phones (via OTG).
- Wide SSD Support:Compatible with sizes 2230, 2242, 2260, and 2280.
- Driver-Free:Plug and play on Windows, Mac OS, Linux, and Android.
Compatibility Guide:
- ✅ Supports:M-Key NVMe (PCIe), B+M Key NVMe, B+M Key SATA (NGFF).
- ❌ Does NOT Support:M.2 PCI-E AHCI Protocol SSDs.
Specifications:
- Chipset:Realtek RTL9210B
- Output Interface:USB 3.1 Type-C (Male)
- Max Speed:10Gbps (NVMe) / 6Gbps (SATA)
- Board Dimensions:Approx. 10.5cm x 2.3cm
- System Support:Windows 10/11, Mac OS, Linux, Android
Package Includes:
- 1 x RTL9210B M.2 to USB-C Adapter Board
- 1 x Thermal Pad (for heat dissipation)
- 1 x Securing Screw
- 1 x Screwdriver
|
